Add a Photo to an Element

Add a Photo to an Element  | Video

1. Take a photo of the element and select “Choose” in the lower right-hand corner

2. Draw on the photo to highlight important information  | Video

   1. To clear the drawing, select the black “X” in the upper left corner of the photo

   2. To save the drawing, select the “Save” button in the upper right corner

3. Add additional photos, if needed

   1. Select the Camera Icon

   2. Choose the location you wish to import from

      1. “Camera Roll” will navigate to the photos stored on the physical device

      2. “Camera” will allow you to take a new photo

4. Select “Continue” in the upper right corner when finished